SCM PROFISET 60 AUTOMATIC THROUGH FEED PLANER MOULDER COMPOSITION 4

GENERAL FEATURES 

Machine base 

Thick steel machine base with strongly ribbed structure and tubular supporting base. 

Worktables 

Tubular steel infeed table with vertical adjustment by means of parallelogram system. The cast iron worktables have a low friction co-efficient and are extremely hardwearing. They are equipped with removable inserts in front of the vertical spindles 

Fences 

Widthwise adjustable infeed right fence by means of parallelogram system and it is complete with a pre-straightening system through the reference engraver placed on planer spindle (tool is not included). 

Right fences with easily adjustable sectors for a correct positioning according to the used tools  

Spindles 

100 mm diameter cast iron spindle cylinder with a couple of 85mm diameter radial bearings. Centre-to-centre distance between bearings: 215mm to ensure the maximum stiffness and precision. 

Feed system 

The beam which supports the feed system is made of a tubular ribbed structure and it is provided with manual vertical movement or automatic movement by NC coupled to the top horizontal spindle. 

The feed speed can be stepless adjusted by means of an inverter. Feed rollers are driven by universal joints and gearbox drive. 

An idle roller placed on the outfeed table improves the feed when dealing with particular machined sections. 

Shafts and feed rollers made of steel with hardened surface and standard pneumatic pressure. 

"SET UP" quick adjustment system 

It is a patented, exclusive SCM device allowing very easy and quick set-up with every tool change. 

The right and left vertical spindles (on request also top horizontal spindle) are equipped with the "SET UP" quick adjustment system, which allows the set-up of the machine in one single step. 

It is enough to set the minimum tool diameter (in case of  a top horizontal spindle), and the tool itself, working thickness, front/rear pressures, feed rollers are automatically adjusted. 

Working unit positioning 

All working unit adjustments are controlled from the machine front with mechanical digital readout of position and decimal precision of work section. 

Ergonomics 

All controls are placed on the machine front at a suitable height for easy use. 

The integral safety enclosure ensures low emission of noise and dust guaranteeing a full view of the machine at the same time. 

5÷25 m/min variable feed speed by inverter 

Pneumatic pressure for feed rollers 

Top feed unit fitted in front of surface planer 

No. 2 feed rollers 140x25mm for each feed hub 

STD 

Manual pump for table lubrication 

STD 

Manual centralised lubrication 

STD 

OPTIONS INCLUDED

Increased motor powers: - comp. 4 

5,5 kW planer spindle (7,5 HP); 

11 kW (15 HP) right/left vertical spindle 

7,5 kW (10 HP) top horizontal spindle 

Brake for 3 motors - comp. 4

Kit for enabling profiling with the top spindle 

Features: 

• 100-180mm min/max. tool diameter 
• 40 mm axial stroke 
• 2 mechanical readouts with decimal precision 

Second flanged feed roller opposite left vertical spindle 

• 20mm roller width 

It enables the reduction of the feed centre distance from 450 mm to 430 mm in the composition 4. 

Kit of supplementary flanged feed rollers in front of left vertical spindle 

It includes: 

• 2 steel feed rollers, 20 mm wide 
• 2 distance rings, 40 mm wide 

Kit for min. working width from 25 to 15 mm 

- 125 mm min. tool diameter on left vertical spindle

Kit of planer cutterheads and reference engraver for light-duty machining 

It includes: 

• reference engraver diam.150x40x12mm with 2 knives 
• 2 planer cutterheads for horizontal spindles diam.125x235x40mm with 4 knives 
• 2 planer cutterheads for vertical spindles diam.125x135x40mm  with 4 knives