RYBURN Refurbished Semi Automatic Twin Stair Trenching Machine

Overview

Heavy duty fabricated frame and cast iron tables

Maximum width of board allowed 300mm(12")
Minimum width of board allowed 200mm(8")
Maximum combined thickness of boards allowed 100mm(4")
2 inverter driven router spindles 18,000 rpm
2 direct drive motors 2.2kw(3hp,3ph,220v,60hz)
Diameter of extraction outlet to each head 75mm(3")
Minimum air pressure required 6 bar(90psi)
Compressed air consumption rate 142litre(5cfm) / min
1 set HSS cutters 19mm (0.75")
nosing plates
guide rollers
Automatic cycle start of pitch movement and clamping
Collet and nut type chuck

Instruction book
spanners
spare cutters

Offered fully serviced cleaned and checked

The ST 2000 is semi automatic machine capable of producing both open and closed plan stairs. The unit is equipped with pneumatic pitch movement and clamping to the top and side of the work piece via pressure cylinders. The operator controls the machining sequence of the heads via an easy to use push button control panel. The ST 2000 has two direct drive spindles with pneumatic plunging movement, quick adjusting jig, and combined brush guard and extraction hood on both spindles for ease of operation and safety.